Fax: +86-510-85917799
E-mail: submit@wxlsshzb.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China





The Stainless Steel Reactor is a kind of reaction equipment, and you must pay attention to it during operation, otherwise it will be damaged due to many reasons and cause the production to be forced to stop. Many aspects should be paid attention to in the operation of the reactor. The reactor must be operated strictly in accordance with the rules and regulations. Secondly, before operation, carefully check for abnormalities. During normal operation, do not open the upper cover and touch the wiring terminals on the board to avoid electric shock; it is strictly forbidden to operate under pressure; carefully observe the pressure during the pressure test with nitrogen. When the change of the meter reaches the test pressure, immediately close the nitrogen valve switch; the heating speed should not be too fast, and the pressurization should be carried out slowly, especially the stirring speed, which only allows a slow rise. When the kettle body is heated to a higher temperature, do not touch the kettle body to avoid scalding; after the experiment, the temperature should be lowered first. No quick cooling is allowed to prevent damage caused by excessive temperature difference and pressure. At the same time, unplug the power supply in time. At the same time, pay attention to maintenance after the reactor is used, so that the autoclave can have a better service life.
https://www.wxlsshzb.com/
Previous: The kettle type evaporator is operational purposes
Next: Stainless Steel Reactor For Chemicals installation and use